LTS LTN8704-P4, User Manual

Page: 197 / 217

User Manual of 87XX-P Series NVR
197
15.4 Configuring POS
Steps:
1.
Enter the POS Settings interface.
Menu > Configuration > POS
2.
Select the POS Setting tab to enter the POS Settings interface.
Figure 15.4
POS Settings Interface
3.
Check the POS checkbox to enable this feature. Enter POS Name and Select connection type .
“TCP Receive” or”RS232” optional
4.
Connection can be used in two ways

TCP Receive Setting
Click the icon of TCP Receive port to set receive port of POS . Through the port settings,
Data- directed transmission can be successfully between POS server and DVR/NVR
Figure 15.5
TCP Receive port Settings Interface

RS232 Setting
Purpose: The RS-232 port can be used in two ways:
• Parameters Configuration: Connect a PC to the device through the PC serial port. Device parameters can
be configured by using software such as HyperTerminal. The serial port parameters must be the same as
the device‟s when connecting with the PC serial port.
• Transparent Channel: Connect a serial device directly to the device. The serial device will be controlled
remotely by the PC through the network.