LTS LTN8704-P4 User Manual Download Page 77

Page: 77 / 217

User Manual of 87XX-P Series NVR

6.1

Playing Back Record Files

6.1.1

Playing Back by Channel

Purpose:

Play back the recorded video files of a specific channel in the live view mode. Channel switch is supported.



OPTION 1:

Choose a channel in live view mode using the mouse and click the

button in the quick setting toolbar.

Note:

In the instant playback mode, only record files recorded during the last five minutes on this channel will be

played back.

Figure 6. 1

Instant Playback Interface



OPTION 2:

Enter the Playback interface.

Mouse: right click a channel in live view mode and select

from the menu.

Figure 6. 2

Right-click Menu under Live View

Front Panel: press

PLAY

button to play back record files of the channel under single-screen live view mode.

Under multi-screen live view mode, the recorded files of the top-left channel will be played back.

Note:

Pressing numerical buttons will switch playback to the corresponding channels during playback process.

Playback management.

The toolbar in the bottom part of Playback interface can be used to control playing progress, as shown in

Figure 6. 3.

Summary of Contents for LTN8704-P4


























































































































































































































Search results

Summary of Contents for LTN8704-P4

Reviews:

Brands by name

Popular brands

LTS LTN8704-P4, User Manual

Search results

Summary of Contents for LTN8704-P4

Reviews:

Brands by name

Popular brands