LTS LTN8704-P4, User Manual

Page: 13 / 217

User Manual of 87P Series NVR
13
1.1 Front Panel
Figure 1. 1 87XX-P Series
Table 1. 1 Description of Front Panel
No. Name Function Description
1 Status Indicators
POWER: the POWER indicator turns green when NVR is powered up.
READY: The indicator light is green when the device is running
normally.
STATUS: 1.The light is green when the IR remote control is enabled;
2.The light is red when the function of the composite keys (SHIFT) are
used; 3. The light is out when none of the above condition is met/
ALARM: the light is red when there is an alarm occurring.
HDD: the indicator flickers red when HDD is reading/writing.
Tx/Rx: TX/RX indicator flickers green when network connection is
functioning normally.
2 USB Interface Connects USB mouse or USE flash memory devices.
3
Composite
Keys
1/MENU:
Enter numeral “1”;
Access the main menu interface.
2/ABC/F1:
Enter numeral “2”;
Enter letters “ABC”;
The F1 button when used in a list field will select all items in the list.
In PTZ Control mode, it will turn on/off PTZ light and when the image
is zoomed in, the key is used to zoom out.
3/DEF/F2:
Enter numeral “3”;
Enter letters “DEF”;
The F2 button is used to change the tab pages.
In PTZ control mode, it zooms in the image.
4/GHI/ESC:
Enter numeral “4”;
Enter letters “GHI”;
Exit and back to the previous menu.
5/JKL/EDIT:
Enter numeral “5”;
Enter letters “JKL”;
Delete characters before cursor;
Check the checkbox and select the ON/OFF switch;
Start/stop record clipping in playback.
6/MNO/PLAY: Enter numeral “6”;