LTS LTN8704-P4, User Manual

Page: 152 / 217

User Manual of 87XX-P Series NVR
152
2) Enter the country, host name/IP, validity and other information.
3) Click OK to save the settings.
OPTION 2 : Create the authorized certificate
4) Click the Create button to create the certificate request.
5) Download the certificate request and submit it to the trusted certificate authority for signature.
6) After receiving the signed valid certificate, import the certificate to the device.
12. There will be the certificate information after you successfully create and install the certificate.
Figure 11. 30 Installed Certificate Property
13. Check the checkbox to enable the HTTPS function.
14. Click the Save button to save the settings.
11.2.10 Configuring Email
Purpose:
The system can be configured to send an Email notification to all designated users if an alarm event is detected,
etc., an alarm or motion event is detected or the administrator password is changed.
Before configuring the Email settings, the NVR must be connected to a local area network (LAN) that maintains
an SMTP mail server. The network must also be connected to either an intranet or the Internet depending on the
location of the e-mail accounts to which you want to send notification.
Steps:
1. Enter the Network Settings interface.
Menu >Configuration> Network
2. Set the IPv4 Address, IPv4 Subnet Mask, IPv4 Gateway and the Preferred DNS Server in the Network
Settings menu, as shown in Figure 11. 31.
Figure 11. 31 Network Settings Interface