LTS LTN8704-P4 User Manual Download Page 137

Page: 137 / 217

User Manual of 87XX-P Series NVR

137

Menu>VCA Search> Behavior Search

Select the camera (s) for the behavior search.

Specify the start time and end time for searching the matched pictures.

Figure 10. 4

Behavior Search Interface

Select the VCA detection type from the dropdown list, including the line crossing detection, intrusion

detection, unattended baggage detection, object removal detection, region entrance detection, region

exiting detection, parking detection, loitering detection, people gathering detection and fast moving

detection.

Click

Search

to start searching. The search results of pictures are displayed in list or in chart.

Figure 10. 5

Behavior Search Results

Play the behavior analysis picture related video file.

You can double click on a picture from the list to play its related video file in the view window on the top

right, or select a picture item and click

to play it.

You can also click

to stop the playing, or click

to play the previous/next file.

If you want to export the captured pictures to local storage device, connect the storage device to the

device and click

Export All

to enter the Export interface.

Click

Export

to export all pictures to the storage device.

Summary of Contents for LTN8704-P4


























































































































































































































Search results

Summary of Contents for LTN8704-P4

Reviews:

Related manuals for LTN8704-P4

Brands by name

Popular brands

LTS LTN8704-P4, User Manual

Search results

Summary of Contents for LTN8704-P4

Reviews:

Related manuals for LTN8704-P4

Brands by name

Popular brands