LSIS XBL-EIPT, User Manual, Page: 84 / 123

Chapter 6 EIP Service
6-27
Order
Set-up
Procedure
How to Set up
3
Network
Address and
Connection
Information
Input/
RPI set-up/
Tag set-up
1) Communication based on Assembly Instance
a) Input the IP Address and Connection Parameter.
b) Input the RPI.
i) Requested Packet Interval (RPI): Set up the period of data that a user will receive from server. Client
sets up on what information to get and the server adopts this set-up, data (Produced Tag) will be
transmitted as the way set up. Thus, client allots to this RPI parameter in how long period server will
transmit.
ii) If clicking OK, parameter is downloaded and is automatically connected. Then, data communication
starts.
c) When a module set up, the tag named to Controller Tags in module name is automatically set up, so the
check--out of data is confirmed in Controller Tags. In case of being set up as seen above, data check -
out is available in EIPT: I.