LSIS XBL-EIPT, User Manual, Page: 72 / 123

Chapter 6 EIP Service
6-15
Order
Set-up
Procedure
How to Set up
3
EIP
Block
Set-up
1) Enter the channel number set in the periodic client and select the I/O type and connection type.
2) Click the “Parameter” to change the Tag Size and Instance.
3) How to set the Tag of EIP block depends on XBL-EIPT version
(a) For XBL-EIPT V1.x
a) Write the device address in the local tag of the tag settings.
(b) For XBL-EIPT V2.0 or later
a)
Double-click on the local tag of the tag setting and the "Select EtherNET / IP Tag" window will appear.
b) Double-click the tag to set it.
c) The type of the input local tag is displayed in the data type.
The following example shows how to set the tag size according to the tag type.
i)
To input basic type tags such as TEST_0, TEST_1, TEST_2: Enter 1 in T2O Tag Size
ii) To input array type tags such as TEST_3: Enter the size of array in T2O Tag Size
iii) To input a specific index of a one-dimensional array type such as TEST_3 [1]: Enter 1 for T2O Tag Size.
iv) To input a specific index of a 3-dimensional array type such as TEST_4 [1,1,0]: Enter 1 in T2O Tag Size