LSIS XBL-EIPT, User Manual, Page: 77 / 123

Chapter 6 EIP Service
6-20
6.4.3 Periodic Server Communication Service
For the periodic communication using EtherNet/IP I/F module, even in case of the module operated by the server, you
need to set up the tag size, address.
1)
Basic Parameter Set-up and EIP Service Registry
For basic parameter setting, refer to 1) Basic Parameter Set- up and EDS Register of 6.4.1 Periodic Client
Communication Service.
2)
EIP Channel and Parameter Set-up
Order
Set - up
Procedure
How to Set up
1
EIP Channel
Information
Check - out
1) Set the Operation mode of EIP channel to ‘Implicit Server'.
2) The module for which the basic parameters are set is operated as the periodic server so you do not need to input the IP
address of the opposing station.