Chapter 6 EIP Service
6-16
1) Channel: Drag the EDS file to display the set channel. If several channels are set, a user can select the desired channel
number to configure the block.
2) Operation mode: It is displayed depending on the set channel; displayed as periodic client, non-periodic client and periodic
server.
3) I/O type: Indicates the name of the connection defined in the EDS file of the relevant device. The communication with the
server side will be opened based on the connection method set here.
4) Access mode: Sets up how to communicate with the server. The information supported depending on the module is
recorded in EDS and MULTICAST, Point To Point(UNICAST) may be available.
5) Parameters: Means the parameters of the server side that should be set by a user. For more details on parameters, refer to
the server manual.
▶
Input Only(ID):
Data is provided in the T-> O direction and heartbeat is provided in the O-> T direction.
▶
Listen Only(ID):
A non-Listen Only connection must exist to allow access. Data is provided in the T-> O direction and
heartbeat is provided in the O-> T direction. If the non-Listen Only connection requests T-> O path does not exist, return
an error.
▶
Exclusive Owner(ID): T-> O, O-> T Connection type that can provide data in both directions. The Target accepts only one
exclusive owner connection for the same O-> T path.
▶
Input Only(Tag):
Data is provided in the T-> O direction and heartbeat is provided in the O-> T direction. Input Only (ID)
specifies the input assembly instance of the server, whereas Input Only (Tag) specifies the tag name of the server.
i) T2O Tag Size: Number of data to read from the server side.
It also appears in the Size of the Tag settings.
ii)
O2T Tag Size: Number of data to write to the server side. It also appears in the Size of the Tag settings.
iii) Output Assembly Instance (8bit): Block number on the server side to write.
Generic EDS: It should be set to 150 when connecting to the periodic server set in P2P block 0 of XGB.
XBL-EIPT EDS: It should be set to 0 when connecting to the periodic server set in P2P block 0 of XGB.
(The offset is set to 150 in XBL-EIPT EDS (set value +150).)
iv)
Input Assembly Instance (8bit): Block number on the server side to read.
Generic EDS: It should be set to 100 when connecting to the periodic server set in P2P block 0 of XGB.
XBL-EIPT EDS: It should be set to 0 when connecting to the periodic server set in P2P block 0 of XGB.
(The offset is set to 100 in XBL-EIPT EDS (set value +100).)
6) Parameter Contents: Displays the details of the set parameters.
7) Transmission period (ms): Means the transmission cycle of the data and the setting range is 20~10000 ms.
8) Timeout: Set the value of the integer multiple of the time set as the transmission cycle(ms) and set the time to report error
when the frame does not exist within the set time. The setting range is transmission cycle ×4~512.
9) Date Type:
Displays the tag type set in the local tag.
.
10) Local Tag: Set the area to read or write local data
In case of V2.0 or later, the size of the local tag must be the same as the Tag Size of the parameter contents.
11) Remote Tag: Input the set Producer Tag to the opposing station for the period communication
Summary of Contents for XBL-EIPT
Page 53: ...Chapter 5 Installation of Software and communication Parameters 5 18 ...
Page 98: ...Chapter 7 Diagnosis Function 7 11 Figure 7 3 4 FlashArea Log Screen of System Log ...
Page 106: ...Chapter 7 Diagnosis Function 7 19 Fig 7 4 9 Remote 2 connection directly via Ethernet ...
Page 119: ...Appendix A 12 A 3 External Dimension Dimension Unit mm XBL EIPT ...