LSIS XBL-EIPT, User Manual, Page: 76 / 123

Chapter 6 EIP Service
6-19
3)
Parameter download and Link enable
Refer to 3) Parameter download and Link enable of 6.4.1 Periodic Client Communication Service.
Notice
After adding two XBL-EIPTs to a basic unit and registering 32 blocks as aperiodic client for one and setting another
module acting as server, if you time how long it takes for 32 blocks to be serviced, it is 1.3s. So time to deal with 1
block is about 40ms, when registering 32 blocks, service count per second get less 1. So if you set start condition
fast, the service faster than 1.3 is not available.
Order
Set-up
Procedure
Hot to Set up
2
Block Set-up
▶
Example of Parameter Set-up
1) Channel: Select and use the one among those set up with aperiodic client.
2) Operating Mode: Displays the operation mode depending on the set channel.
3) Function: There are ‘Tag Read’command that reads and saves the tag data from the server; ‘Tag Write’ command that
saves the data to the server; ‘Read/Write’ that inputs directly the parameters not tag.
4) Parameter: Can be set only when setting ‘Read/Write’ in Functions.
▶
Service Code(Hex): Input the service code to be used. (Example.: 0E : Get ,10 : Set)
▶
Class(Hex): Input the Class to set parameters.
▶
Instance(Hex): Input the instance to set parameters.
▶
Attribute(Hex): Input the Attribute to set parameters.
5) Conditional flag: Sets the operation conditions to send messages.
6) Data Type:
i) For XBL-EIPT V1.x: Input the Data Type if Tag that you will set up.
ii) For XBL-EIPT V2.0 or later: If you select the local tag, the data type of the selected tag will be displayed.
7) Tag Settings
a) Local tag: Set up the client’s (own) tag.
b) Remote tag: Set up the server’s tag.
The remote tag name can be set up to 40 characters for XEC and 32 characters for
XBC / XBM.
c) Size
i) For XBL-EIPT V1.x: Sets up the size depending on the data type.
ii) For XBL-EIPT V2.0 or later: If you select the local tag, the size of the selected tag will be displayed.