LSIS XBL-EIMT, User Manual, Page: 95 / 164

Chapter 6 High-speed Link
6-7
(d) Setting of High-speed link blocks
Double-
click „Block‟ on [Fig.6.4.5] to open [Fig.6.4.6].
[Fig. 6.4.6] Setting screen of HS link blocks
Classification Details
Mode
Send Send data
Receive Receive data
Station number
Partner station
number
Settable in case of Receive mode
Range: 0 ~ 63
Block number Block number
Set TRX block
TX block: Max. 64 block (setting range: 0 ~ 63)

Duplicated block number is not allowed
RX block: Max. 128 block (setting range: 0 ~ 63)

Same station number : Duplicated block number is not allowed

Other station number : Duplicated block number is allowed
Read area Address
Set device area used when receiving
Setting device
- XGK: P, M, L, K, D, T, C, U, N, R, ZR
- XGI: M, I, Q, R, W
It shall not be duplicated with the device address being used in program.
Read area
Word size
Size (Word)
Set data size to send
Setting unit : Word
Setting range :1 ~ 200
Save area Address
Set device area used when receiving
Setting device
- XGK: P, M, L, K, D, T, C, U, N, R, ZR
- XGI: M, I, Q, R, W
It shall not be duplicated with the device address being used in program
Save area
Word size
Size (Word)
Set data size to receive.
Setting unit : Word
Setting range :1 ~ 200
[Table 6.4.2] High-speed link setting