Chapter 8 Remote Connection Service
8-2
8.2 Setting and Connection
All PLCs connected via XGT network are available to connect with each other by remote connection service. XG-PD remote
connection is composed of stage 1 and stage 2 connections as described below.
The followings explains remote 1 and remote 2 connections.
[Fig. 8.2.1] Remote connection
[Fig. 8.2.1] shows an example remote stage 1/2 connection in the network system composed of two networks.
8.2.1 Remote 1 connection (If RS-232C cable used)
For remote stage 1 connection, XG-PD shall be in off-line state.
At this state, Select “Online-Connection Settings”
[Fig. 8.2.2] XG-PD remote connection option to select
PLC B’s RAPIEnet station no. : 0
PLC C’s RAPIEnet station no. : 1
RAPIEnet
RAPIEnet
Summary of Contents for XBL-EIMT
Page 153: ...Appendix A 17 A 3 Dimension Unit mm XGL EIMT EIMF EIMH ...
Page 154: ...Appendix A 18 XOL EIMT EIMF ...
Page 155: ...Appendix A 19 XBL EIMT ...