LSIS XBL-EIMT, User Manual, Page: 79 / 164

Chapter 5. Communication Parameters
5-27
5.5 Operation Start-up
RAPIEent I/F module‟s operation is divided into P2P service and High-speed link service generally. When setting the
RAPIEnet I/F module as server, follow the 6.3 and when setting the RAPIEnet I/F module as P2P service, follow the
Chapter 7 about parameter setting
5.5.1 XG-PD setting
(1) Overview
This tool defines basic system parameters for the control and management of network in PLC2PLC communication, and
the basic configuration of communication. In the XG-PD, it is divided into the high speed link and P2P communications
which defines the communication system parameters for the PLC2PLC communication module. The parameters set up
by user can be written (downloaded) in the RAPIEnet I/F communication module and read (uploaded) from the RAPIEnet
I/F communication module.
(2) Connection setting
(a) Select [Online]-[Connection settings] or click icon ( ).
(b) After setting the connection option according to user, click the „connection‟.
(3) Reading IO information
Select [Online]-[Read IO Information] or click the icon ( ). Then IO information of currently mounted is shown
on the project window.
(4) Basic setting
The RAPIEnet I/F Module needs no basic setting. In order to register the RAPIEnet I/F Module on the basic setting
window, install the RAPIEnet I/F Module in the slot, reset system, access the system with XG-PD and select
„Read IO
Information.
‟ As shown in [Fig. 5.5.1]. the RAPIEnet I/F Module appears on the window.