Chapter 9 Example Program
9-2
Set HS link parameter for example system as shown below
Select one among 12 HS link parameters at HS link setting screen like [Fig. 9.1.2] and register the module
[Fig. 9.1.2] Communication module and period setting
Set Module type as RAPIEnet and define Base Number abd Slot Number. After setting HS link, set TRX parameter
from index 0. For example, in case of XGT station no. 1, it consists of TX block 0 and RX block 0. After setting TRX
area according to TRX data map, set communication period according to
“6.6.2 High Speed Link speed calculation”.
Here it is set as default value 200ms. [Fig. 9.1.3]~[Fig.9.1.5] shows results of parameter setting at XG-PD.
[Fig 9.1.3] HS link block setting of XGT station no.1
Summary of Contents for XBL-EIMT
Page 153: ...Appendix A 17 A 3 Dimension Unit mm XGL EIMT EIMF EIMH ...
Page 154: ...Appendix A 18 XOL EIMT EIMF ...
Page 155: ...Appendix A 19 XBL EIMT ...