Chapter 7 P2P Service
7-1
Chapter 7 P2P Service
7.1 Introduction
This service is used to write the self-
station‟s data on a specific area of the correspondent station, or to read the data from a area
of the correspondent station.
Type and application of P2P provided for users will be described.
Programming sequence with P2P used is as follows;
XG-PD
①
Connect to CPU.
Register communication
module
P2P Parameter setting
②
Register up to 128 blocks
Online (Write parameter)
③
Download parameters
Online (Enable Link)
④
P2P Enable
7.2 P2P Instruction
(1) P2P Instruction
There are two P2P Instructions used for user to prepare programs.
Type
Purpose
Read
Reads the specified area of the correspondent station to save.
Write
Saves the specified area data of the self-station on the specified area of the correspondent station.
[Table 7.2.1] P2P type
Summary of Contents for XBL-EIMT
Page 153: ...Appendix A 17 A 3 Dimension Unit mm XGL EIMT EIMF EIMH ...
Page 154: ...Appendix A 18 XOL EIMT EIMF ...
Page 155: ...Appendix A 19 XBL EIMT ...