![background image](http://html1.mh-extra.com/html/lsc/atom-12-24/atom-12-24_operators-manual_1943919031.webp)
Atom Operator Manual
Grab Master
LSC Lighting Systems (Aust) Pty. Ltd.
29
10.4 Grab Master As A Chase Master
Any existing Chase from any Page may be copied to the Grab master, or a chase may be recorded directly
into the Grab master. The Grab master then performs like any other Submaster containing a chase.
Copying A Chase To The Grab Master
To copy a chase from any page of memory, to the Grab master, press;
[RECORD] (COPY)
[PAGE], (If the desired page is already indicated, omit this step. If not, repeatedly press [PAGE] until desired
page is shown, or hold [PAGE] tap [S/A] (page number).
S/A (Chase number)
S/A (Grab master).
When making copies, as each page is selected, all Submasters in that page containing scenes will light,
Submasters containing chases will flash rapidly and empty sub masters are not lit.
Recording A Chase On The Grab Master
To record a Chase in the Grab master, press;
[RECORD], (CHASE)
[S/A] (Grab master).
Each step of a Chase consists of a snapshot of the output which is taken when that step is “added”.
Create the first look on the output, then to record it as the first step, press;
[RECORD], (ADD STEP)
Create the next look on the output.
To record this step, press;
[RECORD], (ADD STEP)
Continue to create and record steps as above.
When all steps have been recorded, complete the chase by pressing;
[RECORD], (END CHASE).
Note: This is the same procedure as recording a chase on a Submaster except that the Grab master is
selected as the chase number. The Chase in the Grab master may be previewed, controlled and
edited, exactly the same as a chase in a Submaster. Refer to the “CHASE” chapter for details.
Hint: The Grab master may be used as a Chase master in any mode of operation and so is especially
useful when operating in “Preset mode” or “Wide mode” where Submasters are not available to
replay chases.