Atom Operator Manual
Layout
LSC Lighting Systems (Aust) Pty. Ltd.
8
9.
GRAB SOLO/ASSIGN KEY
Solo's (flashes or bumps) the contents of the Grab master. (See also SOLO level and ADD/KILL key below).
In conjunction with the RECORD (SCENE) key, it performs the “GRAB” function, or selects the grab master
when required for other various functions. The brightness of its LED indicator shows the level of the Grab
master at the output of the Atom. It also will flash
slowly
whilst a timed fade is in progress
.
10.
IN AND OUT TIME FADERS
Control the IN and OUT fade times of the Preset masters and the Grab master. They may also be individually
assigned to control the IN or OUT fade times of any scene. The current time setting of each fader is shown on
the display when its fader is moved or presses of the FUNCTION key will toggle through the two time settings.
11.
SOLO LEVEL MASTER
Sets the level to which any Channels, Submasters, Preset masters, or the Grab master, will be flashed when
their respective SOLO/ASSIGN key is pressed.
12.
ADD/KILL KEY
Toggles the Add/Kill mode between “Add” and “Kill” as shown by a red indicator in the Add/Kill key.
•
In ADD mode, when a SOLO/ASSIGN key is pressed, the channels that are being flashed will come on (at
the level of the SOLO level master), and the normal output of the Atom is not affected.
•
In KILL mode, when a SOLO/ASSIGN key is pressed, the channels that are being flashed will come on (at
the level of the SOLO level master), and the normal output of the Atom will be killed (blacked out), leaving
only the channels that are being flashed on stage.
Note: Multiple Solo/Assign keys may be pressed at the one time.
FUNCTION
STOP
STEP
(YES)
(NO)
EDIT
SCENE
CHASE
COPY
RECORD
SCENE
CHANNEL
CHASE
DIMMER
STEP
RATE (BPM)
OUT(S)
IN(S)
LEVEL
(ADD STEP)
(DELETE STEP)
(END CHASE)
PAGE
MODE
PRESET
WIDE
SCENE
FREEZE
>
<
PREVIEW
EDIT
13
14
15
16
17
19
20
21
22
23
24
25
18
RECORD & PREVIEW/EDIT Section (common to both models).
13.
PAGE KEY
•
In SCENE mode it is used to select the current page (1 to 9) of memory that is loaded into the Submasters.
•
When recording, previewing or editing scenes or chases, it is used to select the required page (1 to 9) for
the scene or chase.
•
It is also used to Preview channel levels (Page C) and to Preview/Edit the patch when enabled (Page P).
Repeated presses of the Page key will step through the pages. To
directly
select a page;
Hold [PAGE] then tap [S/A] (Page Number) or [S/A] (Red 10) for page “C” or [S/A] (Red 11) for page “P”.
Pages C and P only appear when in preview mode.
14.
PAGE DISPLAY
Displays the page number selected by the Page key.
15.
RECORD SCENE (ADD STEP) KEY
Used to record the current output into a Scene, or into the Grab master or to Add (record) steps in a chase.
16.
RECORD CHASE (END CHASE) KEY
•
Used to select RECORD CHASE mode.
•
Also used to complete the recording of a chase when all the desired steps have been added.