![background image](http://html1.mh-extra.com/html/lsc/atom-12-24/atom-12-24_operators-manual_1943919022.webp)
Atom Operator Manual
Scenes
LSC Lighting Systems (Aust) Pty. Ltd.
20
To reveal a scene on the output;
•
ensure that you are in Scene mode.
•
select the page that contains the scene.
•
fade up the RED Preset master.
•
fade up the Submaster for the scene number.
Grab Master As A Scene Master
A scene may be copied to the Grab master allowing it to act like a Submaster containing a scene. See the
“GRABMASTER” chapter for details.
8.4 Previewing and/or Editing A Scene
You may
Preview
the recorded channels (on the S/A key LED indicators) and the fade times contained in any
scene without revealing the scene on the output of the Atom.
Editing
a scene is an extension of Previewing a scene. Whilst you are previewing a scene, you may edit the
channel levels (including channels not already on in the scene), and you may also edit the fade times.
•
To Preview a scene (in the current page), press;
[PREVIEW],
[S/A] (Scene number).
•
To Preview a scene (in the Grab master), press;
[PREVIEW],
[S/A] (Grab master)
•
To Preview a scene in a different page, or to Preview a scene when NOT in scene mode, press;
[PREVIEW],
[PAGE], (repeated presses until desired page is shown), or hold [PAGE] tap [S/A] (page number).
As each page is selected, all Submasters containing scenes in that page will light. (Submasters
containing chases flash quickly and empty sub masters are not lit.)
To preview a scene in the selected page, press;
[S/A] (Scene number).
When a scene is previewed, the display shows the Page/Scene number and the indicators in the channel S/A
keys of any channels recorded in that scene will light. Their
intensity
reflects the levels of those channels in
the scene.
The FUNCTION key flashes to show that it is active. It allows you to read and edit actual channel levels and
fade times for the scene (see below). Repeated presses of the FUNCTION key will cycle the display through
channel LEVEL(%), IN time setting, OUT time setting and the Page/Scene number.
When the Page/Scene number is displayed, you can preview other scenes in the current page by simply
pressing their S/A keys or preview scenes in other pages by using the page key to select the required page,
then pressing the S/A key of the required scene.
Channel Levels
To read and/or edit the level of any channel in a scene, preview the scene (above) then press;
[FUNCTION].
The “SCENE”, “CHANNEL” and “LEVEL” LED indicators beside the display show that it will read the
LEVEL (%) of a CHANNEL in a SCENE.
To see the level of any channel, press;
[S/A] (channel number).
Whilst the channels S/A key is held down, the display shows the channel number.
When the S/A key is released, the display shows the level of that channel in the scene. The channel’s
S/A indicator flashes to show which channel’s level is being displayed.
To edit the level of the selected channel, rotate the EDIT wheel.
If the level is varied from its recorded level, the Edit wheel indicator flashes. It flashes
quickly
when a
parameter is varied
above
its recorded value and flashes
slowly
when a parameter is varied
below
its recorded value. If the level is restored to its original value, the edit indicator remains steady.
Press and release further channel S/A keys to read and/or edit their levels.
Fade Times
To read and/or edit the IN or OUT fade times in a scene,
preview
the scene as described above then use the
function key to select each time.