LS ELECTRIC iXP2 Series, User Manual

Page: 119 / 132

Appendix 1. Troubleshooting
APP1-19
Object
Error code
Occurren
ce
location
Error message Reason and measure
Type Address
Project
download
0x26
0x1D
XGT
Panel
Failed to XGP Panel
startup program.
Please update XGT
Panel Software.
It can’t find software to reboot XGT
Panel.
Update the XGT Panel.
0x1E
XGT
Panel
Project data is not
downloaded. Please
download project
again.
The project data was not downloaded
normally because of communication
error. Check the connection status of
communication cable and If this
symptom is repeated, contact
Customer Service Center.
0x1F
XGT
Panel/
XP-
Builder
Failed to read Version
information file. Please
download project
again.
There is version information file but
when it can’t read file normally because
of the device error, downloading is
stopped because it doesn’t know
version. If this symptom is repeated,
contact Custom Service Center
Project
download
from USB
storage
device
0x27
0x51
XGT
Panel
Cannot find project
data in USB Storage
There is no USB or device status of
USB is not good or project is not saved
properly.
0x52
XGT
Panel
Project information file
is not in USB Storage.
The project is not saved normally in the
USB.
Check whether there is XP_Project
folder and [project name].inf in the USB
or not.
0x53
XGT
Panel
Failed to read project
information file.
It can’t read project information file
because the project is not saved in the
USB normally. Save the project again
from XP-Builder to the USB.
0x54
XGT
Panel
Device type is not
matched.
The connected device type is not same
as the device type set in the project in
the USB. In case of this, project can’t
be downloaded into the device. Edit the
project again or download according to
the connected device.
0x55
XGT
Panel
Cannot read user
password.
Information about the password can’t
be red because of the device error. If
this symptom is repeated, contact
Customer Service Center.
0x56
XGT
Panel
Password is not
matched.
When saving the project, the password
inputted by user is not same as present
connection password. Input correct
password and save the project.