Lowrance LCX-112C, Operation Instructions Manual

Page: 90 / 232

80
Overlay Data Shown, with water speed selected (left). Press
ENT
to
access
R
EMOVE
option (right). Press
ENT
again to remove item and
return to the Overlay Data Shown screen.
To move overlaid data:
You may find it useful to rearrange data floating in your display window.
1. Press
MENU
|
↓
to
O
VERLAY
D
ATA
|
ENT
.
2. You'll see a list of the overlay data currently displayed. Select the
item you want to move and press
ENT
| → to
M
OVE
|
ENT
.
3. The data begins to flash on your screen. Use any combination of
→ ,
←
,
↑
and
↓
to move the data to a new location.
4. When satisfied, press
EXIT
|
EXIT.
NOTE:
The Customize command and the Overlay Data command use the same
information categories. The difference between the two commands is the
Customize command is only used to modify pages with digital data boxes,
while Overlay Data changes information floating on the screen. See
Customize Page Displays, on page 68 for information on customizing data
boxes.
To change displayed data font size:
1. From the Map or Sonar page, press
MENU
|
↓
to
O
VERLAY
D
ATA
|
ENT
.
2. Press
↓
or
↑
to select Data Type |press
→
or
←
to Data Size |
EXIT
.
The new size will display the selected data type (To change the font size
of another data type repeat these steps, beginning with step two above).
3. To return to the previous page, press
EXIT
.