Lowrance LCX-112C, Operation Instructions Manual

Page: 81 / 232

71
You can move the cursor to any location on the screen, letting you
pinpoint the depth of a target.
1. From the Sonar Page, press
MENU
| ↓ to
D
EPTH
C
URSOR
|
ENT
.
2. The depth cursor appears. Press ↓ ↑ to move the cursor line.
3. To clear the depth cursor, press
EXIT
.
Depth Range - Automatic
When turned on for the first time, the bottom signal is automatically
placed in the lower half of the screen. This is called Auto Ranging and is
part of the automatic function. You can change the range to a different
depth, depending upon the bottom depth and the current range. To do this:
1. From the Sonar Page, press
MENU
| ↓ to
D
EPTH
R
ANGE
|
ENT
.
Sonar Page menu with Depth Range command selected (left); The
Depth Range Control Scale (right).
2. The Depth Range Control Scale appears. Press ↑ or ↓ to select a
different depth range. A blue bar highlights the selected range. The shaded
numbers cannot be selected.
3. When the new range is selected, press
EXIT
to clear the menu.
Depth Range - Manual
You have complete control over the range when the unit is in the
manual mode. There are 16 depth ranges, from 5 to 4,000 feet.
To switch to Manual Depth Range:
1. First, turn off automatic depth range. From the Sonar Page, press
MENU
|
↓
to
A
UTO
D
EPTH
R
ANGE
|
ENT
.
2. Press
↑
to
D
EPTH
R
ANGE
|
ENT
and the Depth Range Control Scale appears.
3. Press
↓
or
↑
to select a different depth range. A horizontal blue bar
highlights the selected range.
4. When the new range is selected, press
EXIT
to clear the menu.
NOTE:
The sonar's depth capability depends on the transducer installation,
water and bottom conditions, and other factors.