Lowrance LCX-112C Operation Instructions Manual Download

Page: 161 / 232

151

Map Boundaries:

Press

↓

and

→

RAW

OUNDARIES

. With the option highlighted,

press

ENT

to check it (turn on) or uncheck it (turn off). After the option

is set, press

EXIT

to return to the page display.

Fill Water With White:

Press

↓

and

→

ILL

ATER

ITH

HITE

. With the option highlighted,

press

ENT

to check it (turn on) and uncheck it (turn off). After the

option is set, press

EXIT

to return to the page display.

Trackline Extension:

Trackline Extension is a tracking option that provides a visual

interpretation of your velocity. To set trackline extension: Press

↓

RACKLINE

XTENSION

ENT.

Use

the

↑

↓

keys

to select the desired distance setting

and press

ENT.

Presentation Mode:

Presentation Mode gives you some

control over the map layout by allowing

you to choose between US and International Modes

To access Presentation

Mode you must first select the Navionics option from the Map Dataset
Choice menu. Press

→

to Map Dataset Choice and press

ENT

. Use

↑

↓

keys

to select Navionics, then press

ENT

. Press

↓

and

→

RESENTATION

ODE

ENT.

Use the

↑

↓

keys to select the desired mode, then press

ENT

EXIT

to return to the page display.

Safety Contour:

The Safety Contour command allows you to modify depth contours on a
Navionics map for water less than 10 meters deep. To access the Safety

Contour window you must first select the option from the Map Dataset
Choice menu. Press

→

to Map Dataset Choice and press

ENT

. Use

↑

↓

keys to select Navionics, then press

ENT

. Press

↓

AFETY

ONTOUR

ENT.

Use

↑

↓

to choose the desired

depth and press

ENT

Map Overlays (Range Rings; Lat/Long Grid):

The map screen can be customized with four range rings and/or grids
that divide the plotter into equal segments of latitude and longitude.
Range rings are handy for visually estimating distances on the map.

The ring diameters are based on the current zoom range. For example:
at the 100-mile zoom, the screen will show two rings with your current

position in the center. The large ring touching the left and right sides of

the screen is 100 miles in diameter (same as the zoom range). The
second smaller ring is 50 miles in diameter (always 1/2 the zoom

range).

Summary of Contents for LCX-112C








































































































































































































































Search results

Summary of Contents for LCX-112C

Reviews:

Related manuals for LCX-112C

Brands by name

Popular brands

Lowrance LCX-112C, Operation Instructions Manual

Search results

Summary of Contents for LCX-112C

Reviews:

Related manuals for LCX-112C

Brands by name

Popular brands