manualshive.com logo in svg

Lowrance LCX-112C, Operation Instructions Manual

The Lowrance LCX-112C offers advanced marine GPS technology for flawless navigation. Unlock the full potential of this device with our comprehensive Operation Instructions Manual, available for free download at manualshive.com. This manual provides step-by-step guidance, ensuring you make the most of your boating experience.

Share
Download
background image

 

106

 

The Over Zoomed notice in the top left corner means you have reached 

the map’s detail limits for the area. Zooming in closer will reveal no more 

detail because a custom map has not been loaded on the MMC. 

If you're using only the factory-loaded background map, the maximum zoom 

range is 20 miles. You can continue to zoom in closer, but the map will 

enlarge without revealing more map content (except for a few major city 
streets.) Load your own high-detail custom map made with MapCreate and 

you can zoom in to 0.05 miles. 

 

 

 

Map Pages with high-detail MapCreate map. Arterial streets appear at 

the 6-mile zoom range with a few Point of Interest icons visible (left). 

Numerous Points of Interest dots are visible at 3-mile range, along 

with minor streets (center). At 0.6-mile zoom, you can see a interstate 

highway with an exit, major and minor streets as well as Point of 

Interest icons (right). 

Background map vs. MapCreate map content 

The background map includes: low-detail maps of the whole world, 

containing cities, major lakes, major rivers, political boundaries, and 
medium-detail maps of the United States. 
The medium-detail U.S. maps contain: all incorporated cities, shaded 

metropolitan areas, county boundaries, shaded public lands (such as 
national forests and parks) and some major city streets. Also included 

Summary of Contents for LCX-112C









































































































































































































































Reviews:

No comments

Related manuals for LCX-112C

Eagle Silent Six-Sixty Installation Instructions Manual preview
Silent Six-Sixty
Brand: Eagle Pages: 10
Eagle Mach 1 Installation And Operation Manual preview
Mach 1
Brand: Eagle Pages: 12
Eagle SUPRAPRO I.D. Installation And Operation Instructions Manual preview
SUPRAPRO I.D.
Brand: Eagle Pages: 32
Eagle 168 Installation And Operation Instructions Manual preview
168
Brand: Eagle Pages: 64

Brands by name

Popular brands

Load more brands