manualshive.com logo in svg

Lowrance LCX-112C, Operation Instructions Manual

The Lowrance LCX-112C offers advanced marine GPS technology for flawless navigation. Unlock the full potential of this device with our comprehensive Operation Instructions Manual, available for free download at manualshive.com. This manual provides step-by-step guidance, ensuring you make the most of your boating experience.

Share
Download
background image

 

159

To view tide information: 

1. Use the arrow keys to move the cursor over a tide station icon. When 
it is selected, a pop-up name box appears. 
2. Press 

WPT

 to display the Tide Information screen. 

 

 

Tide Information screen. 

The Tide Information screen displays daily tidal data for this station on 

this date at the present time. The graph at the top of the screen is an 

approximate view of the tidal range pattern for the day, from midnight 
(MN) to noon (NN) to midnight (MN). The dotted line across the graph 

is the Mean Lower Low Water line (MLLW). 
The height scale on the top right side of the graph changes, based upon 

the maximum 

range

 of the tide for that day. The MLLW line also 

adjusts its position as the height scale changes. 
You can look up tidal data for other dates by changing the month, day 

and year selection boxes. To select another date: 
1. Use 

←

 

→

 

to highlight month, day or year, then press 

ENT

. 

2. Use 

↑

 

↓

 to select the desired month, day or year and press 

ENT

. 

To clear the information screen, press 

EXIT

. 

Navionics

®

 Charts 

Your unit can also display Navionics electronic charts on MMCs. Like 

NauticPath, Navionics charts contain tide and port service information. 

NOTE: 

The primary operational difference between a NauticPath chart 
and a Navionics chart is the way the chart data is set up for 

display. NauticPath charts are ready for display as soon as they are 

Height 
Scale 

MLLW 
Line 

Tide 
Table 

Current Time Line

Summary of Contents for LCX-112C









































































































































































































































Reviews:

No comments

Related manuals for LCX-112C

Wesmar SS590 SERIES Installation & Operation Manual preview
SS590 SERIES
Brand: Wesmar Pages: 62

Brands by name

Popular brands

Load more brands