Lowrance HDS Gen3 Touch Operator'S Manual Download

Page: 76 / 166

StructureScan

StructureScan HD uses high frequencies to provide a high
resolution, picture-like image of the seabed.

Note:

You must have a StructureScan HD transducer

installed to use StructureScan features.

StructureScan HD provides a 328 m (600 ft) wide coverage in high
detail with SideScan, while DownScan provides detailed images of
structure and fish directly below your boat, down to 92 m (300 ft).
The StructureScan page is accessed from the

Home

page when the

StructureScan transducer is connected and the Structure and Sonar
features are turned on in the system settings

Advanced Settings

dialog.

The StructureScan image

The view

The StructureScan panel can be set up as a DownScan image, or

showing left/right side scanning.
The DownScan image can also be added as an overlay to the
traditional Sonar image.

StructureScan

| HDS Gen3 Operator Manual

Summary of Contents for HDS Gen3 Touch







































































































































































Search results

Summary of Contents for HDS Gen3 Touch

Reviews:

Related manuals for HDS Gen3 Touch

Brands by name

Popular brands

Lowrance HDS Gen3 Touch, Operator'S Manual

Search results

Summary of Contents for HDS Gen3 Touch

Reviews:

Related manuals for HDS Gen3 Touch

Brands by name

Popular brands