manualshive.com logo in svg

Lowrance HDS Gen3 Touch, Operator'S Manual

Share
Download
Lowrance HDS Gen3 Touch Operator'S Manual Download Page 145

Alarms

Alarm system

The system continuously checks for dangerous situations and
system faults while the system is running. When an alarm situation
occurs, an alarm message pops up on the screen.
If you have enabled the siren, the alarm message is followed by an
audible alarm, and the switch for external alarm becomes active.
The alarm is recorded in the alarm listing so that you can see the
details and take the appropriate corrective action.

Type of messages

The messages are classified according to how the reported situation
affects your vessel. The following color codes are used:

Color

Importance

Red

Critical

Orange

Important

Yellow

Standard

Blue

Warning

Green

Light warning

Single alarms

A single alarm is displayed with the name of the alarm as the title,
and with details for the alarm.

20

Alarms

 | HDS Gen3 Operator Manual

145

Summary of Contents for HDS Gen3 Touch







































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands