Lowrance HDS Gen3 Touch Operator'S Manual Download

Page: 44 / 166

Note:

All numeric values are shown in the relevant system

units (unit of measurement) set by user.

Easy View

Magnifying feature that increases the size of chart items and text.

Note:

There is no indication on the chart showing that this

feature is active.

Photo overlay

Photo overlay enables you to view satellite photo images of an area
as an overlay on the chart. The availability of such photos is limited
to certain regions, and Navionics cartography version.
You can view photo overlays in either 2D or 3D modes.

No Photo overlay

Photo overlay, land only

Full Photo overlay

Photo transparency

The Photo transparency sets the opaqueness of the photo overlay.
With minimum transparency settings the chart details are almost
hidden by the photo.

Minimum transparency

Maximum transparency

Charts

| HDS Gen3 Operator Manual

Summary of Contents for HDS Gen3 Touch







































































































































































Search results

Summary of Contents for HDS Gen3 Touch

Reviews:

Related manuals for HDS Gen3 Touch

Brands by name

Popular brands

Lowrance HDS Gen3 Touch, Operator'S Manual

Search results

Summary of Contents for HDS Gen3 Touch

Reviews:

Related manuals for HDS Gen3 Touch

Brands by name

Popular brands