Lorex LW2702 series, Instruction Manual

Page: 16 / 72

Remote Control
12
Remote Control
1. 1/ : Move menu cursor UP;
change time settings; start/pause
playback; jump to camera 1 while
in Quad Mode;
2. Enter : Confirm menu selections.
3. 4/ : Move menu cursor LEFT;
rewind playback; jump to camera 4
while in Quad Mode; decrease
values in certain menu options.
4. MENU / Back : Press to open the
Main Menu; close menu windows.
5. Record : Press Motion to enable
motion recording – system will
ONLY record when motion is
detected; press
to start/stop
manual recording.
6. Volume : Increase/decrease
volume of two-way audio from the
receiver; increase/decrease
volume during playback.
7. Quad : Press to change the display
view to quad (4-way) split-screen.
8. 2/ : Move menu cursor RIGHT;
increase playback speed; jump to
camera 2 while in Quad Mode;
increase values in certain menu
options.
9. 3/ : Move menu cursor DOWN;
change time settings; stop
playback; jump to camera 3 while
in Quad Mode.
10. Scan/Del : Press to enable/disable
Screen Saver mode; delete
recorded video files.
11. Channel : Press “ A ” to enable/disable automatic sequence; press M to manually change the
channels (1~4).
12. AV : Press to send the image to a connected TV or monitor (AV cable required)
NOTE : Screen Saver Mode is not available if using AV-out.
1
2
3
4
5
6
8
9
10
11
12
7
Figure 1.0 Remote Control