Using the Main Menu
52
Zoom
Use the zoom menu to enable 1X and 2X digital zoom on the cameras. While zoomed in, you can
scan the image and view channels in full-screen.
NOTE
: Zoom is intended as a temporary setting that is applied to ALL CHANNELS. When you are
finished using zoom, you should return the view to 1X view.
To set the zoom:
1.
View camera 1, 2, 3 or 4 in single-channel full-screen.
2.
From the Main Menu, select
Setting
and press the
Enter
button
.
3.
From the Settings menu, select
Zoom
and press the
Enter
button
.
4.
Select
X 1
or
X 2
and press the
Enter
button
.
5.
Press
MENU
until all menu windows are closed. The selected camera will be shown on the
main display in 2X zoom.
While zoomed in you can perform the following:
•
Press
LEFT/RIGHT/UP/DOWN
to scan the image.
•
Press
CHANNEL—M
to change channels manually (you can only change channels using
the CHANNEL—M button while zoomed in)
•
Press
CHANNEL—A
to enable Auto Sequence
•
Press the
Record—
button
to start/stop manual recording
•
Press
QUAD
to view Quad mode – all channels will be zoomed-in
To disable zoom:
1.
Open the Zoom menu.
2.
Select
X 1
and press the
Enter
button
.
3.
Press the
MENU
button until all menu windows are closed.
Figure 14.6 Zoom menu
Summary of Contents for LW2702 series
Page 71: ......
