23
Screen Saver Mode
Use the Screen Saver mode to conceal the fact that the LCD receiver is actually a surveillance
recorder. The system comes pre-loaded with five scenic images that let the LCD receiver
simulate a picture frame. When motion is detected by a camera, the LCD receiver will display
the triggered camera in single channel full-screen.
NOTE
: The images are loaded to the system firmware,
not the SD card. Formatting the SD card
will not delete the Screen Saver images on the system.
To enable Screen Saver mode:
1.
Press the
MENU button
to open the Main
Menu.
2.
From the Main Menu, select
Setting
and
press the
Enter
button.
3.
From the Settings menu, select
Screen
Saver
and press the
Enter button
.
4.
From the Screen Saver menu, select
Blank screen
or
Picture 1~5
and press the
Enter button
.
NOTE
: Select “Blank Screen” as a power
saving option.
5.
Press the
MENU button
until all menu windows are closed.
6.
Press the
Scan/Del button
to activate Screen Saver Mode. One of the selected images will
appear on the LCD receiver and “SCAN” will light up on the bottom of the LCD receiver.
7.
Press the Scan/Del button again to disable Screen Saver mode.
NOTE
: The system will be in Auto Sequence mode when Screen Saver mode is disabled.
SCAN
Figure 5.4 Press the Scan/Del button to turn on the Screen Saver
Figure 5.3 Screen Saver menu
Summary of Contents for LW2702 series
Page 71: ......
