4. Handlebars
You can raise or lower the handlebars
by adjusting the stem. Use the Allen
wrench [included] to loosen bolt B [see
image 14] and decide how much you'd
like to lower or raise your bar. Then
tighten bolt B and at the same time pay
attention to keep the bar aligned with
the wheel.
�
lop1flt
®
You can adjust the bar by loosening
bolt A [see image 14]. Bolt A has a
cover. so you have to take that off first.
Decide on how you want to position
your bar. then tighten bolt A and put
the cover back on.
Again: to loosen a bolt. turn left. to
tighten a bolt. turn right.
Lopifit Instruction Manual -
Page 10
