7. Miscellaneous
7.1 Front and rear light
The Lopifit has a front and rear light. The front
light has two light options
;
press and
release once and the light will be flashing.
F
or steady white light press the button a
second time. [see image 21]. The
rear light is operated by the button on
top of the battery [see image 22].
7.2 Walking on the Lopifit
It takes a little practice to walk on the
treadmill in a confident way. However.
thousands have done it before you and
it is just a matter of practice.
Mounting the Lopifit:
There are two ways to mount the Lopifit
,
Manually
,
or Automatic.
Manually:
a)
walk along side of the Lopifit at a brisk
pace in order to gain speed for stability.
b)
As you step onto the Lopifit
,
push back
on the treadmill and the electric motor
engages and treadmill.
c)
At this point
,
use your thumb to adjust
speed with the
(+)
and
(
-
)
on the
display.
d)
In order to stop the treadmill and
electric motor
,
pull either brake handle
for approximately 2 seconds and you
will be coasting.
e)
In order to reengage the treadmill and
electric motor
,
simply refer to step
(
b
)
�
lop1flt
®
Automatic:
Push and hold the Auto button for
approximately two seconds then
release and the treadmill and the
electric motor will automatically
engage simultaneously to your
preselected speed.
O
nce in motion you
can proceed with step c listed under
manual operations. If you disengage
the Lopifit
,
either procedure will
reengage the treadmill and electric
motor.
NOTE:
In the event of an
emergency
,
firmly grab both brakes
,
stop walking
,
and the Lopifit will come
to a stop. While using the brakes. you
can stop walking.
7.3 Maintenance tips
Clean the Lopifit on a regular basis
as dirt and road salt have damaging
effects. When washing the bike. use
only warm water with a mild liquid
soap and a cotton cleaning cloth for
the large areas. Then remove residual
dirt by wiping and polishing with a dry
cloth.
Never use a pressure washer as
this can damage delicate parts.
Lightly spray siliconspray on the chain
after it is cleaned. Grease aluminium.
chrome and steel parts with acid-free
vaseline in order to prevent oxidation.
Give the Lopifit an extra protection
layer with siliconspray.
Check the battery of the bike's lights
regularly. It is important to make
yourself as visible as possible to other
road users and also that you can clearly
see what is around you.
Lopifit Instruction Manual -
Page 16