�
lop1flt
®
6. Operating panel
6.1 General
The display is mounted on
the
handlebars. When you start the system
by turning the key clockwise
to a
horizontal position. the lights on the
display turn on [see images 19 and
20].
The lights show your battery level
[four lights] and your current speed
[three lights]. If you accelerate in a
lower gear you can save battery life.
Walking and accelerating in high gear
for a long time will result in a higher
energy consumption. During walking
the display will show the estimated
battery level. when you stop it will
show the actual battery level.
6.2 Gears
The gears on the display
are easy to operate by using the plus
and minus buttons. Lopifit has six
different speeds in total:
Gear
1: The first light is on.
Gear
2:
The first light is blinking.
Gear
3:
The first and second light are
on.
Gear 4:
The first and second light are
blinking.
Gear
5:
The first. second and third light
are on.
Gear
6:
The first. second and third light
are blinking.
6.3 The AUTO button
By pressing the AUTO button. the
treadmill starts running and the Lopifit
moves forward. You can use this
button when you want to mount the
treadmill while it's already moving. The
techniques of stepping on the treadmill
and start walking is further explained in
7.2.
Ii\
NOTE!
The AUTO button is also
l.D
a test button. Do you press the
button and nothing happens?
Step 1:
Check whether the panel lights
are on and thus the battery.
Step 2:
Check the sensors [see chapter
l].
NOTE!
Be sure that a speed level
is selected. It is possible to push the
minus button and no gears be
activated.
Lopifit Instruction Manual -
Page 14