3. Battery
3.1 General
The Lopifit doesn't work without the
battery that powers the motor. The
battery is located in the rack and it is
the only type that fits in the holder. Turn
on the battery with one of the three
keys [one for immediate use and two
spares] that are included. Start your
bike by turning the key to the right in a
horizontal position [see image 9].
Visually check if the display is lit to
indicate you have power from the
battery.
Ii\
NOTE!
When your battery isn't
l.D
working, check whether you
have charged it sufficiently. If so. check
if you have inserted the battery fully into
the docking station. It is impossible
to continue turning the key if the battery
isn't docked correctly. Turn the battery
off by turning the key to the left.
3.2 Battery removal
Insert the key in the lock until it doesn't
go any further to the left [see image 11].
The battery will come loose. Before you
pull out the battery, take the key out of
the lock. Place your fingers in the slot
under the battery tray in order te get a
firm grip. Now you can pull it out.
�
lop1flt
®
3.3 Battery placement
Firmly insert the battery with the
connecting side first in the rack. Push
the battery forwards into the docking
and make sure it is well connected.
Lock the battery in its place by turning
the key and take the key out.
NOTE!
If it is impossible to turn
the key or take it out of the lock,
it
means that the battery is not fully in
place. Gently tap forward on the rear of
the battery until you are able to turn the
key.
3.3 Charging the battery
Charging the battery can be done
directly on the bike or after
diconnecting it from the bike. First, turn
off the system! Insert the plug of the
charger [included] into the charge
socket [see image 12 for the location of
the socket] and into the wall outlet. [110v
- 240v]
Warning!
A damaged power cable
must be replaced immediately to
prevent an electric shock!
NOTE:
If the Lopifit is not used for a long
time. recharge the battery at least once
every six months.
Lopifit Instruction Manual -
Page 8