5. Brakes
5.1 Front and rear brakes
The front and rear brake levers are
both located on the handlebars. The
front brake [see image 16] on the left
and the rear brake on the right. Both
brakes interrupt the electric current
to the motor. The left brake stops the
treadmill and the rear wheel. The right
brake stops the treadmill and front
wheel. When
you stop the treadmill
by sqeezing either brake lever. you
have to reactivate the treadmill to
continue walking.
5.2 Tuning the brakes
Tuning the front brake and rear brake
is a similar procedure. You can both
tighten or lossen them.
Before you can tune the brakes you
have to disconnect the outer holder
unit shown in part A [see image 17].
Push the disc until the round notch
�
lop1flt
®
is at the bottom and take the cable
fixing bolt unit out of the holder [see
image 18]. Now you can shorten or
lengthen the brake cable. Do not
tighten the cable too much. because
the brake can drag and tightening the
back brake too much can also
interrupt the electric current to the
motor. More about this in 1.2.
Lopifit Instruction Manual -
Page 12
