2. Remove the Torpedo Bottle from the cage by holding the
mount and twisting the bottle and pulling out.
4. Place the mount on the aerobars by pressing each of the mounting
clamps onto the extensions. The mounting clamp is designed to
expand around the extensions and snap in place.
Ensure the clamp is completely touching the extensions.
3. Loosen the mounting clamp screws using the 3mm Hex Wrench.
5. Center the mounting plate and hand tighten each of
the screws.
6. Secure the Velcro straps by routing them through the clamps.
Pull the straps as tight as possible and attach them in place.
7. Tighten both mounting clamp screws to 35 in lbs (4.0 Nm).
TOOLS REQUIRED
MOUNTING TO BIKE
3mm Hex Wrench
Torque Wrench up to 35 in lbs (4.0 Nm)
HARDWARE
CAGE MOUNTING
M5 x 12mm
Socket Head
M5 x 16mm
Socket Head
M5 Flat Washer
(x2)
M5 Nylon Insert
Lock Nut (x2)
M5 Nylon Spacer
M4 x 20mm
Flat Head Screw
M5 x 8mm Button Head
Flange Screw (x2)
MOUNTING CLAMP
BOTTLE
M4 x 10mm
Button Head Screw
(x2)
M3 x 6mm
Flat Head Screw
(x2)
Screw Post / Screw
Spring
AERO COMPUTER MOUNT
M5 x 16mm
Button Head
Flange Screw
M5 Fender Washer
M5 Flat Washer
M5 Nylon
Insert Lock Nut
M5 External
Lock Washer
M5 x 25mm
Flat Head Screw
IMPORTANT:
PLEASE COMPLETELY UNDERSTAND ALL USER INSTRUCTIONS AND SAFETY INFORMATION BEFORE USING THIS PRODUCT. AS WITH ANY HIGH TECH PRODUCT YOU WILL NEED TO
ROUTINELY CHECK FOR LOOSE HARDWARE, CRACKS OR OTHER DAMAGE AND REPLACE ITEMS AS NECESSARY. DO NOT USE PRODUCT IF ANY OF THESE CONDITIONS EXIST.
COMPUTER MOUNT
TORPEDO VERSA 200
TORPEDO VERSA 200
1. Rotate the top of the computer mount all the way forward.
Dolphin Breather Valve
(x2)