Look Solutions Viper NT, Operating Manual

Page: 9 / 21

8
4. Fluid
5. Operating the Viper nt
The Viper nt has been designed to be used with Look fog fluids.
The following Look fog fluids are available:
Quick-Fog thick, quick disappearing fog fluid
Regular-Fog thick, long lasting fog fluid
Slow-Fog thick, extremely long lasting fog fluid
If fluids have been used other than Look fog fluids we can‘t grant warranty on parts
that have been in contact with the fluid.
PLEASE NOTE : The vaporizer of our machines does not have to be cleaned! Cleaners,
available on the market, can damage the vaporizer! We cannot grant warranty in this
case.
4.2 Changing the fluid container
– Disconnect the fluid tube from the lid by pressing the brass collar [10] and removing
the coupling [9].
– Remove the container from the tank housing of the Viper nt.
– Unscrew the lid [11] of the empty container and screw it onto the new container.
– Place the full container into the tank housing.
– Push the brass coupling [9] into the brass collar [10] until you hear a click.The brass
collar is now locked firmly.
4.1 General Notes
5.1 Selecting the location
The location in which the Viper nt is to be operated must
– be dry,
– be free from dusty or polluted air,
– be free from vibrations,
– be an non-flammable place or surface,
– be well-ventilated with fog-free air keeping the ambient operating temperature
between 5° C and 45° C and the relative air humidity below 80%.