![background image](http://html1.mh-extra.com/html/look-solutions/viper-nt/viper-nt_operating-manual_1938904013.webp)
12
5. Operating the Viper nt
P 0 1
. .
P 1 5
Control panel Timer-Menu
(the red Timer-LED [19] shines)
Adjusting of the output/pump
in steps of 1% (1-99%)
Adjusting of the wait time
in minutes (0.1-99)
5.4.3 Stand alone
The
Viper nt
can be used in the Stand alone mode. In this mode the control of the pump
must be adjusted at the machine.
a) Press and release the Mode-button [14] until a „P” and two figures appear on the
display [18].
b) Adjust the pump output with the Up/Down-buttons [15] and press the Enter-button
[16] once to start the fogging process.
The machine now produces fog until the Enter-button is pressed again.
The output can be changed during the fogging process.
5.4.4 Control via Radio remote
A radio remote is available as an option. It will be delivered with a 3pin XLR plug.
Connect the receiver of the radio remote to the machine, using the 3pin XLR socket [8]
on the back of the machine.
Adjust the requested pump output at the machine (see point 5.4.3).
Press and hold the first button at the transmitter of the radio remote as long as you
want fog to be produced (see manual „Radio remote“).
Summary of Contents for Viper NT
Page 2: ...1 Operating manual a Look Solutions product viper nt...
Page 20: ...19...
Page 21: ...20 a Look Solutions product...