12)
Box;
13)
Heater;
14)
Cables.
Depending on shooting requirements, you can mount any lens from the supplied set. Electric coupling is provided by cables.
Installed motor is MU-332A. The remote control unit or control unit accomplishes camera control.
To maintain the camera in operable state at temperatures of +5 to –40°C, it should be placed into the box with heater. The
remote control unit or control unit accomplishes camera control.
Operator can hold the camera by means of the hand support. The camera can be placed onto tripod (without the box or in the
box). The camera used in either hand-held or stationary mode.
Hand-held setup consists of:
1)
The camera;
2)
60m mag;
3)
Collimator sight;
4)
Hand support;
5)
Set of the lenses, lens hoods, and light filters;
6)
Control unit.
Stationary setup consists of:
1)
The camera;
2)
60m and 120m mags;
3)
Set of the lenses, lens hoods, and light filters;
4)
Brackets for heavy lenses;
5)
Control unit;
6)
Remote control unit;
7)
Stationary support (the box support).
Figure 1. Camera "Gladiolus-1" on the demonstration tripod. General view
5.3. Kinematics
The kinematics of the camera is shown on the Figure 2.
It provides a movement transmission from the motor to the claw mechanism, film-transporting mechanism, shutter, mag, and
film counter. It also generates electrical pulses into external circuit.
Summary of Contents for GLADIOLUS
Page 6: ...Figure 2 Kinematics ...
