Figure 28. Power source unit
5.7.10. Box
The camera should be placed into the box during operation at high dust loading, high relative humidity, and low air temperature
(+5 to –40°C).
The box consists of the body (200) and housing (201) attached to each other by means of the locks (202) using a rubber
padding. There is base (203) (Figure 30) with screws (205) for the camera fastening inside the box. Dove-tail guiders of the
base (203) hold the support (206) (Figure 31) secured by means of two screws (207).
5.7.10.1. Body of the box
Body of the box is load-carrying part with the cap (211) for a lens. Front side of the cap has a coated glass. There is cellular
ring (212) (Figure 30) with silica gel inside the cap. The cap is fastened to the body by means of four screws (213) (Figure 29).
There is carrying handle on the box.
5.7.10.2. Housing of the box
The housing has two heater flanges covered with the caps (218) (Figure 30) and window “Б” with two inserts (219) (providing
a containment) and the nut (220).
Rear side of the housing has the cup (221) (Figure 31) with silica gel covered with glass for observing the silica gel color.
5.7.10.3. Base
The base (203) (Figure 30) is intermediate part between the camera and tripod. It is also linking part between the box body and
housing. The base holds plate (222) (Figure 31) with tripod nuts, and two stoppers (223) limiting screws (207) of the support
(206).
Summary of Contents for GLADIOLUS
Page 6: ...Figure 2 Kinematics ...
