Figure 8. Electric circuit of the power source unit
5.5.5. Electric circuit of the heater
Electric circuit of the heater is shown on the Figure 9. The heater is purposed for maintenance of positive temperature in the
box during operation at low temperatures (less than +5°C).
The heater is stand-alone unit mounted onto the box. Powering of the heater is accomplished from separate power source of
27
2.7V DC. Power consumption is not more than 600W.
---Section omitted---
Figure 9. Electric circuit of the heater
5.5.6. Electrical connections
Electrical connections are shown on the Figure 10. The connections are accomplished by means of the cables:
Cable #1 connects the power source unit with the connector Ш1 of the control unit. The cable is purposed for powering the
camera.
Note. During maintenance procedure powering is accomplished through the terminal box of the monitoring unit.
Cable #2 connects the camera with the connector Ш2 of the control unit.
Note. During maintenance procedure powering is accomplished through the terminal box of the monitoring unit.
Cable #3 connects connector Ш3 of the control unit with the connector Ш2 of the heater.
Cable #4 connects the remote control unit with the control unit.
Cable #5 is purposed for providing the camera with ‘time’ markers during maintenance procedure.
Cable #6 is used instead of the Cable #1 when the camera is powered from the external power source.
Summary of Contents for GLADIOLUS
Page 6: ...Figure 2 Kinematics ...
