LOMO GLADIOLUS, Manual

Page: 22 / 39

Figure 23. Prismatic sight
5.7.5. Hand support
The hand support (Figure 24) is purposed for the convenience of the operator when he is shooting form hands.
The hand support is handle (160) with tube rod (161) attached to it by means of tooth-type coupling. The handle can be fastened
at different angles. The handle has the button (162) to start the camera. When the button is pressed, it’s shift toward operator
triggers ‘events’ marks.
The handle can be attached to the camera by means of the screw (163). Connector (164) links the handle with the camera
circuit.
Figure 24. Hand support
5.7.6. Tripod
Description of the tripod is in the document 5ShKS.00.000PS
5.7.7. Remote control unit
The remote control unit is purposed for operating and monitoring the camera from up to 30m. The unit is shown on the Figure
25.
It is rectangular metal box. Side walls are prolonged and serve as handles. Most of the elements are situated on the front panel
(167) and on the board inside the body. The front panel contains following control and monitor devices:
1)
switch (168) ‘POWER’ to powering the control unit;
2) voltmeter (169) indicating the input voltage;
3)
button (170) ‘START’ powering the camera;
4)
button (171) ‘STOP’ switching off the camera;
5)
button (172) ‘Marker’ for marking ‘events’;
6)
lamp (173) ‘POWER’ indicating the input power presence;
7)
lamp (174) ‘WORK’ indicating operation mode of the camera;
8)
lamp (175) ‘BREAK’ indicating break of the film;
9)
lamp (176) ‘READY’ indicating readiness of the camera to operate in the box;