4-teeth reg pin moves along two guiders (100) and along rear gland guider attached to the body by means of screws. Movement
from claw forks is transmitted to the reg pins by means of the lever (101). Both crankshafts are installed in the busing (102)
which outer diameter is eccentric regarding to the crankshafts axes.
Front gate (103) is secured by means of the lock (104). Rear gate consists of two parts (105) and (106).
To ensure reliable work of the mechanism at speed of 24 to 216-240 fps special adjustment is used to change a distance
between claw mechanism pins and reg pins. This adjustment is accomplished by turn of the bushing (102) accordingly to
engraving of the mechanism body, and secures by means of the screw (107) (Figure 16). The coupling (108) (Figure 15) links
the mechanism to the camera gears. The claw mechanism is aligned in the camera by means of the protruding part of the
bushing (102) and secures by means of the screw (109) (Figure 16).
Front film gate is mounted on the pin (110) (Figure 14) and secures by means of the latch (104).
Figure 14. The camera gears
Figure 15. Claw mechanism. Front and rear gates are removed.
Summary of Contents for GLADIOLUS
Page 6: ...Figure 2 Kinematics ...
