Loepfe YARNMASTER 1N1 Instruction Manual Download Page 11

Page: 11 / 62

General

1N1 / 3N1

The screenshots in this Instruction Manual serve for illustra-
tion. They are not to be used as examples for setting.

1.3 Liability

The information and safety information in this Instruction Manual have been
compiled with consideration of the applicable standards, directives and regu-
lations, the state-of-the-art and many years of experience.

1.3.1

Information in this
Manual

1.3.2

Delivery

In addition to the contractually agreed obligations, the manufacturer’s General
Terms and Delivery Conditions are applicable.

1.3.3

Technical Modifications

Loepfe Brothers Ltd. will not be liable for damage and accidents resulting
from the following:

Unauthorized conversion and modification of the yarn clearer system

The use of spare parts/non-OEM parts/conversion parts not supplied by us

1.3.4

Improper or False
Application

Loepfe Brothers Ltd. will not be liable for damage and accidents resulting
from the following:

Improper user of the machine

Failure to comply with the information and notices in this Instruction
Manual

1.3.5

Inadequate Maintenance

Loepfe Brothers Ltd. will not be liable for damage and accidents resulting
from the following:

Neglected or inadequate maintenance

Failure to comply with the instructions described in the “Maintenance”
chapter

1.3.6

Loss of Data

Loepfe Brothers Ltd. will not be liable for damage resulting from the
following:

Loss of data and operating failures caused by possible malfunctions or
defects of the machine and / or software

Summary of Contents for YARNMASTER 1N1































































Search results

Summary of Contents for YARNMASTER 1N1

Reviews:

Related manuals for YARNMASTER 1N1

Brands by name

Popular brands

Loepfe YARNMASTER 1N1, Instruction Manual

Search results

Summary of Contents for YARNMASTER 1N1

Reviews:

Related manuals for YARNMASTER 1N1

Brands by name

Popular brands