Operation of LZE-V
1N1 / 3N1
5.12 Machine Data
Machine Block
–
Shows the state and the efficiency of each particular rotor.
–
The state of a rotor is indicated by the color of the efficiency bar.
Production Group
–
Related information of the selected production group are displayed.
–
The values efficiency, produced weight and Rh (rotor hours) are in rela-
tion to the start time shown in the header.
Scope
–
Shows an enlargement of a 24 rotor section of the machine block. The
selection can be changed by moving the transparent window to the
required position on the machine block.
–
The scope also shows actual production data of a single rotor which are
selected in the section enlargement.
–
A double click to the rotor data opens the clearer details (
Monitoring >
Details
) of the selected rotor.
Efficiency
–
Shows the actual efficiency of the selected production group as well as
of the entire machine.
–
As per the set target efficiency the numbers will get displayed either in
red (below target) or in green (above target). The target efficiency can
be set in
Setup > Machine > Configuration
.
In addition to the actual efficiency, the efficiency trend of the last two hours is
also displayed.
The
Overview
shows all important production related data.
5.12.1
Rotor Status Color Codes
The Rotor status color informs about the condition of each rotor.
Color
Status
Lime green
Running
Grey
No communication
Black
Hardware locks, forced lock
Red
Quality locks
Purple
Foreign matter locks
Teal
Polyprop locks
Orange
Quality stops
Color
Status
Fuchsia
Foreign matter stops
Blue
Polyprop stops
White
Yarn broken
Green yellow
Run + inhibit
Tan
Dust stops
Brown
Dust locks
Cyan
Forced stop
Monitoring > Overview
