Loepfe YARNMASTER 1N1 Instruction Manual Download Page 10

Page: 10 / 62

General

1N1 / 3N1

In this Instruction Manual, safety information is marked with symbols and
signal words which express the extent of the hazard.

The safety information must be strictly observed to prevent accidents,
personal injuries and damage to property.

General danger

Voltage (Electrical hazard)

Risk of burns

Highly inflammable

Electrostatically sensitive components and assemblies

Grounding connection

Material damage

DANGER

WARNING

CAUTION

ATTENTION

Indicates an imminently hazardous situation which will result
in death or serious injury.

Indicates a potentially hazardous situation which may result in
death or serious injury.

Indicates a potentially hazardous situation which may result in
minor or moderate injury.

Indicates a potentially hazardous situation which may result in
damage to property.

1.2 Explanation of

Symbols

1.2.1

Symbols

1.2.2

Signal Words

1.2.3

Information

Useful hints and recommendations.

Summary of Contents for YARNMASTER 1N1































































Search results

Summary of Contents for YARNMASTER 1N1

Reviews:

Related manuals for YARNMASTER 1N1

Brands by name

Popular brands

Loepfe YARNMASTER 1N1, Instruction Manual

Search results

Summary of Contents for YARNMASTER 1N1

Reviews:

Related manuals for YARNMASTER 1N1

Brands by name

Popular brands