38
Operation of LZE-V
1N1 / 3N1
Please make sure that all rotors of a group are stopped
when you activate the lot change, otherwise they will all
stop with a dust lock.
5. An article with assigned clearer settings must be selected from the 10
active articles of the LZE-V. More details for article selection can be found
in the chapter “
Article Administration
”.
6. For a lot change tick the box of the production group that you want to
change and confirm. A lot change as well as a shift change will be forced.
Initiate a lot change:
–
After changing the yarn count
–
After changing the lot
–
After changing the spinning parameters on the machine
–
After changing the of the take-up speed
–
After an interruption of more than 24 hours
Fixed speed
You can enter a fixed take-up speed, if necessary. But this setting will only
be activated if there is no PXI connected, or a 4k or CAN connection is
established to the LZE-V through which the LZE-V receives the actual speed.