Installation
30
www.loepfe.com
MillMaster TOP
Save settings in the configuration
Prerequisites
ü
The panel over the Informator is open.
1. Turn the hex knob to position 2.
2. Select
<q>
from the menu to open
Save changes and restart system
.
3. Press Enter (2x).
ð
The settings in the configuration are saved.
3.3.8
Schlafhorst Informator with series number > 7000
Check battery
Prerequisites
ü
The battery level must not be too low to configure the settings.
ü
Do not switch off the machine while editing settings.
1. Stop the machine.
2. Activate the Informator’s screen.
3. Open the
Service > Maintenance
menu.
4. Check the battery level.
ð
The battery level should be > 3000 mV.
Connect network
Prerequisites
ü
A software version ≥ 1.30.00 is no longer necessary.
1. Activate the Informator’s screen.
2. Press “Machine parameters”.
3. Press “Network”.
4. Enter the password and confirm.
5. Change the Network setting to
Network with.
6. Press
.
Restart the Informator
1. Switch to the Loepfe screen.
2. Press the
«Maintenance > AWE 800 status»
button.
3. Press
.
4. Enter the password (service) and confirm.
5. Press
.
6. Scroll
to 255.
7. Press
.
8. Scroll
to 258.
9. Press
to reboot the system.
10. Press the
«Setup»
button once the Setup screen opens.
