Installation
MillMaster TOP
www.loepfe.com
27
Connect network
1. Activate the Informator’s screen.
2. Press “Machine parameters”.
3. Press “Network”.
4. Enter the password and confirm.
5. Change the Network setting to
Network with.
6. Press the Enter icon.
Settings in the configuration
DANGER
Danger of electric shock
Touching live components and electrical connections can lead to severe injury or
death.
4
Unplug the device from mains power before performing any repair or
maintenance work.
4
Unplug the device from mains power before removing device enclosure or
opening side panels.
1. Open the panel over the Informator.
2. Pull out the plug to turn off the Informator.
3. Turn the hex knob to position 1.
4. Insert the plug to turn on the Informator.
ð
The system restarts.
Power plug
Hex knob
Reconfigure boot system
Prerequisites
ü
The Boot menu is open.
ü
The TCP/IP address is available.
1. Select
<rc>
from the menu to
Reconfigure the boot system
.
2. Press Enter.
