Loepfe MillMaster TOP, Installation Manual

Page: 21 / 53

Installation
MillMaster TOP
www.loepfe.com 21
3. Enter the foreman password.
4. Press
«OK»
.
ð
The user level / password level is set to Foreman and the menu changes.
5. Select Reboot System .
ð
A “Reboot system?” pop-up window appears.
6. Press
«Yes»
.
ð
The system restarts.
ð
The
«System monitor for LZE»
window opens.
1. Press
«To start service screen»
to change the IP address.
ð
The
«Loepfe YM Zenit monitor service screen»
window opens.
2. Press
«Change IP Address»
.
ð
A “Disable CF Protection” pop-up window appears.
3. Press
«Yes»
to reboot the system.
ð
The system restarts.
ð
The
«SetIpAddrXp»
window opens.
4. In the “Address Mode for LAN” field, select the radio button for “Use static IP address”.
5. In the “Static IP Address for LAN” field, enter the machine’s current IP address, e.g. from the IP
addresses [
}
15] table.
6. Press
«Proceed»
to reboot the system.
ð
The settings are saved.
ð
The system restarts.
ð
The network settings are configured.